Tips & Nozzles

Terms and Definitions

PACE manufactures hundreds of inexpensive, long-life soldering, desoldering and rework tipstips-soldering-desoldering-rework-pace

Highest Quality, Long-Life, Inexpensive Soldering, Desoldering, Rework Tips and Nozzles

PACE manufactures hundreds of replacement solder/desolder tips, heat focusing hot air nozzles, and a variety of accessories for our soldering, desoldering and rework handpieces and systems. Soldering/Rework Tips are made of high conductivity copper, are iron-plated to assure long-life, and tinned with lead-free solder for RoHS compliance. Quick-Connect Nozzles for our TF Series of BGA Rework Systems and ST Series of Hot Air Rework stations are constructed of welded stainless steel and will last for years.

Please use the Dropdown Menu below to select tips and nozzles for the handpiece, system or accessory you are supporting:

8999+++Nozzles for Convective Systems
12542+++Soldering Iron Tips
8988+++Desoldering Tips
12543+++Tweezer Tips
12544+++ThermoPik Tips
12545+++Air Pencil Tip-Nozzles
12546+++SMR/Pulse Heat Tips
12547+++Component Handling Tips
12548+++Machining Tips

TD-100 Standard Soldering Tips

TD-100 Standard Soldering Tips

PS-90 Tips

The PS-90 soldering iron can be used with a variety of tips... from simple, single point soldering tips to more advanced surface mount tips.  Click on a catagory above to select the type of tip you are looking for.

TD-200 Ultra-Performance Blue Series Tips

Blue Series Tip-Heater Cartridges combine a high-accuracy sensor and robust heater, delivering up to 120 Watts of power in one integrated cartridge. Unlike curie point systems, you can select any temperature you want from 380°F/193°C to 850°F/454°C without changing the cartridge – one tip, any temperature. The quick-change cartridges can be instantly swapped while hot, and achieve set temperatures in seconds.

SX-100 Desoldering Tips

SX-100 Desoldering Tips offer the best performance from any desoldering tip. 

SX-100 tips can be used in:

     SX-100 handpiece (Blue and Black Connector Handpiece),  
     SX-90 handpiece (Blue and Black Connector Handpiece), or 
     SX-80 (Yellow and Black Handpieces) fitted with a heater date coded 01/07 or later. 

TD-100 SMT & Specialty Tips

TD-100 SMT tips are ideal for removing a wide range of standard SMT component types.  There are also several specialty tips available, such as our Blade tips which are ideal for pad preparation and when using desoldering wick.


Tips for the MT-100 MiniTweez thermal tweezer. 

TT-65 ThermoTweez Tips

Tips for the TT-65 ThermoTweez.

Nozzles for TF 1800, TF 1700 and TF 2700

Nozzles for TF 1800, TF 1700 and TF 2700 BGA/Area Array Rework Systems


Tips for the TP-100 ThermoPik Handpiece.  The TP-100 is used to remove QFPs from PCBs.  A vacuum cup is used to lift the part after reflow.  .